Microscope Lamps and Accessories
USA Scientific Inc 1 mL serological pipet 0 01 mL graduations standard tip individually wrapped sterile 1000/case
1 mL serological pipet 0 01 mL graduations standard tip individually wrapped sterile 1000/case
Electron Microscopy Sciences Maxtaform 150 mesh, Cu/Rh
Maxtaform grids with clean and smooth edges, firm support, and a large open area. 3 mm diameter, 0.75 mil thickness. Copper grids with one surface coated with inert Rhodium. This coating will eliminate tarnishing, give side identification, and reduce the bar thickness.
Grid: Cu/Rh
Pitch: 165 µm
Hole: 131 µm
Bar: 34 µm
:
Ted Pella Inc Diffraction Grating Replica and Latex Calibration Standard
Two-in-one; this standard for calibration provides a double-check of the accuracy of magnification calibration. It is particularly useful at higher magnification. The latex sphere size is 0.261 µm and the carbon grating replica with Au/Pd shadowing is 2160 lines/mm. Supplied on a G400, 400 square mesh copper Gilder grid.
Electron Microscopy Sciences Formvar/Carbon Film 3-4 nm/3-4 nm thick on Square 400 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Formvar is 5 to 6 nm thick with a 3 to 4 nm carbon coating.
Grid: Copper
Leica Biosystems Leica Microsystems System Integration LAS X (MPN 11640024)
The Leica Microsystems System Integration LAS X (MPN 11640024) is an accessory listed with specific DVM6 digital microscope configurations that provides system-level integration with the manufacturer's imaging software. It is supplied as a single integration module included in those configurations.
- Provides system-level integration with the manufacturer's imaging software.
- Included as an accessory in specific DVM6 digital microscope configurations.
- Supplied as a single integration module in those configurations.
- Intended for use with compatible digital microscopy systems.
- Offered as an optional system integration accessory rather than a standalone microscope.
Leica Biosystems HC PL FLUOTAR 20x/0.55 Microscope Objective (20x, NA 0.55)
HC PL FLUOTAR 20x/0.55 is a fluorescence-optimized microscope objective that provides 20x magnification with a 0.55 numerical aperture. It delivers flat-field correction and chromatic control suitable for fluorescence and transmitted-light imaging in routine and research microscopy workflows.
- 20x magnification with 0.55 numerical aperture.
- Fluorescence-optimized optical design for high-contrast imaging.
- Plan correction for a flat, well-corrected field of view.
- Appropriate for routine and advanced light-microscopy applications.
- Compatible with standard microscope objective turrets and parfocal systems.
Morrell Instrument Company Inc CFI PLAN FLUR100X/1.30/0.20OIL
NC3849807 CFI PLAN FLUR100X/1.30/0.20OIL